CE & UKCA marked intumescent Pipe Wraps for combustible pipes | Forms a penetration seal to reinstate the fire resistance performance of walls and floors.

A high pressure intumescent sealant for pipework up to 125mm diameter | Metallic Pipes, Cables, Cable Bunches (inc Telecommunication), Cable Trays and Cable Ladders | Grey - 310ml Single Cartridge.

CE/UKCA Pipe Collar for combustible pipes | Reinstates the fire resistance performance of walls and floors | For internal use | Pipe Collar size 110mm.

CE and UKCA Marked | PFP Intumescent Pipe Closer are designed to maintain the fire resistance of fire rated walls and floors where these are breached by continuous plastic pipes.

Intumescent & Acoustic Putty Pads Internal & External versions | Non-Setting, fire protection, putty pads | Supplied in a cross shape | Up to 90 minutes fire resistance | Easy fit | Fire & sound.

The PFP FR Pipe Wrap is designed to maintain the fire resistance of fire separating walls and floors when these are breached by plastic pipes, conduits or metal pipes | up to 240 minutes for both integrity and insulation.

Intumescent Low Profile Ventilation Fire Duct Sleeve | Suits wide range of fire partition walls | Internal Width: 110 x Internal Height: 54 x Length: 180mm.

CE & UKCA marked - A High strength fire resistant mortar | For use on rigid floors or walls | High strength and load bearing properties | Easy to mix and for internal use.

Fire resistance Mastic tested in flexible walls, rigid walls and floors | CE & UKCA Marked | UL-EU Accreditation | White - 310ml Single Cartridge.

CE Marked Pipe Fire Sleeves for Plastic and Metal Pipes | 4-in-1 Solution Fire, Acoustic, Thermal and Vapour Seal | D: 140mm x L: 300mm x thickness: 25mm | Easy to Fit.

CE and UKCA Marked PFP Acrylic | Creates a robust fire seal by the formation of a durable intumescent char | Can be used with a suitable filling material.

A highly advanced flexible coating for use when installing the Fire Rated Batt System | CE, UKCA Marked & UL-EU Listed | For use with the Fire Rated Batt | 5kg Tub.

CE and UKCA Marked PFP FR Graphite | A high specification formulation designed to prevent the spread of fire | Easy to apply | High sound insulation | Hardens quickly, tack free after 1 hour.

CE Marked PFP FR Coatings | An ablative sealant coating designed to enhance, seal and fire protect stonewool fibres in PFP FR Boards | Spray directly onto mineral fibres | Non Toxic & Emission Free not harmful to you.

CE Marked | Uncapped / Uncapped (Open | Open) fire tested as required for ventilation systems | Offers excellent acoustic insulation | Simple to install without special tools.

The PFP FR EX Mortar is a dry white powder consisting of inorganic compounds and perlite | Simple to apply leaving a very smooth finish | Fully set within 1 hour.

Single pack fire resistant board for sealing service penetrations in walls or floors | Offering up to 4 hours fire resistance | Cut edges or joints should be coated with Fire Coat or Intu Mastic | Must be used in conjunction with Intu Mastic or Fire Coat - Ablative Spray Grade.

The putty chord is designed to seal small gaps 0-10mm wide | Easy to apply fire rated putty | Hand workable, reusable and re-serviceable due to its non-setting properties.

CE/UKCA Marked PFP FR Boards | A high-density stone wool, over-coated with PFP FR Coating | Simple and very quick to install | Resists UV, humidity and frost | Must be used in conjunction with PFP FR Acrylic or PFP FR Coating 8L.

CE and UKCA Marked PFP Acrylic | Creates a robust fire seal by the formation of a durable intumescent char | Can be used with a suitable filling material.

Fire resistance tested in flexible walls, rigid walls and floors | CE, UKCA & UL-EU Listed | Shelf Life 18 months | White coloured sealant comes in 5kg tubs.