CE Marked | Uncapped / Uncapped (Open | Open) fire tested as required for ventilation systems | Offers excellent acoustic insulation | Simple to install without special tools.

CE & UKCA marked intumescent Pipe Wraps for combustible pipes | Forms a penetration seal to reinstate the fire resistance performance of walls and floors.

CE/UKCA Marked PFP FR Boards | A high-density stone wool, over-coated with PFP FR Coating | Simple and very quick to install | Resists UV, humidity and frost | Must be used in conjunction with PFP FR Acrylic or PFP FR Coating 8L.

CE Marked Pipe Fire Sleeves for Plastic and Metal Pipes | 4-in-1 Solution Fire, Acoustic, Thermal and Vapour Seal | D: 140mm x L: 300mm x thickness: 25mm | Easy to Fit.

CE and UKCA Marked PFP FR Graphite | A high specification formulation designed to prevent the spread of fire | Easy to apply | High sound insulation | Hardens quickly, tack free after 1 hour.

A high pressure intumescent sealant for pipework up to 125mm diameter | Metallic Pipes, Cables, Cable Bunches (inc Telecommunication), Cable Trays and Cable Ladders | Grey - 310ml Single Cartridge.

Fire resistance tested in flexible walls, rigid walls and floors | CE, UKCA & UL-EU Listed | Shelf Life 18 months | White coloured sealant comes in 5kg tubs.

Intumescent Fire Pillows can be used for creating either temporary or permanent fire barriers and are ideal for sealing cable trays and ducts that penetrate fire resistance structures.

Fire resistance Mastic tested in flexible walls, rigid walls and floors | CE & UKCA Marked | UL-EU Accreditation | White - 310ml Single Cartridge.

Intumescent Low Profile Ventilation Fire Duct Sleeve | Suits wide range of fire partition walls | Internal Width: 110 x Internal Height: 54 x Length: 180mm.

CE and UKCA Marked PFP Acrylic | Creates a robust fire seal by the formation of a durable intumescent char | Can be used with a suitable filling material.

A highly advanced flexible coating for use when installing the Fire Rated Batt System | CE, UKCA Marked & UL-EU Listed | For use with the Fire Rated Batt | 5kg Tub.

Intumescent & Acoustic Putty Pads Internal & External versions | Non-Setting, fire protection, putty pads | Supplied in a cross shape | Up to 90 minutes fire resistance | Easy fit | Fire & sound.

CE Marked PFP FR Coatings | An ablative sealant coating designed to enhance, seal and fire protect stonewool fibres in PFP FR Boards | Spray directly onto mineral fibres | Non Toxic & Emission Free not harmful to you.

The putty chord is designed to seal small gaps 0-10mm wide | Easy to apply fire rated putty | Hand workable, reusable and re-serviceable due to its non-setting properties.

The PFP FR EX Mortar is a dry white powder consisting of inorganic compounds and perlite | Simple to apply leaving a very smooth finish | Fully set within 1 hour.

CE and UKCA Marked | PFP Intumescent Pipe Closer are designed to maintain the fire resistance of fire rated walls and floors where these are breached by continuous plastic pipes.

CE and UKCA Marked PFP Acrylic | Creates a robust fire seal by the formation of a durable intumescent char | Can be used with a suitable filling material.

The PFP FR Pipe Wrap is designed to maintain the fire resistance of fire separating walls and floors when these are breached by plastic pipes, conduits or metal pipes | up to 240 minutes for both integrity and insulation.

Single pack fire resistant board for sealing service penetrations in walls or floors | Offering up to 4 hours fire resistance | Cut edges or joints should be coated with Fire Coat or Intu Mastic | Must be used in conjunction with Intu Mastic or Fire Coat - Ablative Spray Grade.

CE & UKCA marked - A High strength fire resistant mortar | For use on rigid floors or walls | High strength and load bearing properties | Easy to mix and for internal use.